Assalam o alakum guys, here is my entery for EDBF compition.It is a 3d plane called `` AJ Slick foamy`` constructed from sea foam(refrigerator packing metiral).
It has a wing span of 34" and fuselage length 27". I am using my own construction techniques.This plane will be powered by a brushless motor Towerpro 2409.Due to mid winger It should be a high speed 3D plane with aerobatics.Loops Rolls Imelmans Inverted flight.
Here is the plan Total
cost of the airframe less than Rs 800.

First of all I downloaded some images of different sizes AJ Slick. Then I perchase a nose cover which is like AJ Slick 42"

Then I increased the size of image according to the nose cover, it becomes the wing span 34" and fuselage 27"

I traced all parts of plane on a wax mat.

Then I traced all parts on the sea foam 40*10",thickness 2",fuselage traced twise, and cut them with a metal cutter blade.

Oh, this will be interesting!

Intersting build. Welcome to the competition.

Interesting way to make templates!! Welcome to the competition and best of luck with your build!

Welcome to eDBF2 Ayub, Good luck for the build.
Is this sea foam same as thermopore?

By the way this technique reminds me of what I did with slowbipe in eDBF1 and Trust me guys It's fun!

Welcome dear... this is the beauty of this competition different ideas comes in....

Thanks bro Asad,Salam,RCSquale, irri and Zahid Rasheed,its same thermopore but a little bit hard,I will try my best to make it perfect so please guide me where i do something wrong.
Thanks

Ingenious method for making the plane suit the cowl!

One lives and learns everyday.

Welcome to eDBF2 Ayub bhai,wounderful idea, Good luck for the build.

Now I rubbed the main wing and elevator with a wood rubbing tool,after making the shape of wing and elevator,
I cut a piece of thermopore 2*4"in shape of block,then kept block on sandpaper and rub to the
wing and elevator again.(Waterproff sandpaper No120).
Then I marked for ailerons,total length of aileron 13",central side 3" flat and other side 1.5" and marked elevator also.

Then I cut them with blade cutter,and rubed the eddge of ailerones.

Then I cut some piece of X-Ray,and marked at three places inside the ailerones and wing,


Now make cuts in aileron and wing with a shaving blade for fitting X-Ray piece, then I fixed tnem in aileron with Magic Depoxi(clear)and then
fixed aileron in the main wing. And the same way with elevator.

Oey Chha Gaey Ho Bhaeeee . . .

Welcome to the Family . . .