Home Forum
Banner
Banner
 
Welcome, Guest
Username Password: Remember me
  • Page:
  • 1

TOPIC: eDBF V2 Scratch Build Z Pink Beaver

eDBF V2 Scratch Build Z Pink Beaver 8 months ago #25639

  • ZR.
  • OFFLINE
  • Board Blazer
  • Posts: 3058
Well since RCS posted this Big Pink Beaver link

This image is hidden for guests. Please log in or register to see it.

www.rcgroups.com/forums/showthread.php?t=1206714

I start thinking about it... I believe if am able to complete it, not only it would be a cool looking scale plane but a very nice trainer for me as well.
Other then this it really suits me as i have pink foam (jumboolon) have big BL motor, 60A ESC, 3000mah 4S and 3S lipos.

The only issue right now with me is time.... let see how well and how fast i could complete it... I keep my fingers cross.

So im in.... will post details in coming days.

in process.........................
* The more fun you have, the greater your value to yourself and to your society. The more fun you share with others, the more fun you have.

* Aviation is not so much a profession as it is a disease.
Last Edit: 8 months ago by ZR..

Re: eDBF V2 Scratch Build Z Pink Beaver 8 months ago #25641

  • RCSquale
  • OFFLINE
  • Board Blazer
  • Posts: 2456
Nice choice ZR!! At first I posted this build as it was made out of thick pink foam like what you guys have in Pakistan! Jumbolon... So it should be a perfect material match for this build!

Best of luck my dear!
A Belgian lost Overseas
The following user(s) said Thank You: ZR.

Re: eDBF V2 Scratch Build Z Pink Beaver 7 months, 3 weeks ago #26655

  • ZR.
  • OFFLINE
  • Board Blazer
  • Posts: 3058
model dimensions

Wing Span = around 64"
Wing Loading = around 10-12oz/sqft

Material and power system

Pink insulation foam sheets called Jumboolon available here in Pakistan

1/2", 1/4" thick sheets would be used to make it, will use the same foam board for making ribs and skin of wings also. with 6mm dowels will be used for main spar instead of CF ( as it is not readily available to me. )

Power Setup intended to use with this plane

BL motor = DT750 or may be Turnigy 3639 Brushless Motor 1100kv
ESC = Turnigy 60Amp Plush
UBEC = I may or may not use UBEC ( all depends at the end if i go with Flap configuration or not )
Lipo = 3000mah 4S / 3S Lipo (single or 2 in parallel for capacity)

Expected flight characteristics

Good looking, Slow flying smooth scale bird


In process............
* The more fun you have, the greater your value to yourself and to your society. The more fun you share with others, the more fun you have.

* Aviation is not so much a profession as it is a disease.
Last Edit: 7 months, 3 weeks ago by ZR..

Re: eDBF V2 Scratch Build Z Pink Beaver 7 months, 3 weeks ago #26657

  • ZR.
  • OFFLINE
  • Board Blazer
  • Posts: 3058
Today i done tile printing of the basic wing and fuselage parts. ( There is a lot of printing due to its size ) and will print rest of graphics later after Fuselage built.

now im going to join all tiles printouts together this evening.. and will cut 1/2" and 1/4" foarm sheets for the plane using my Hot wire setup

In Process....................
* The more fun you have, the greater your value to yourself and to your society. The more fun you share with others, the more fun you have.

* Aviation is not so much a profession as it is a disease.
Last Edit: 7 months, 3 weeks ago by ZR..

Re: eDBF V2 Scratch Build Z Pink Beaver 7 months, 3 weeks ago #26712

Nice choice ! I really like the engine cowl on this plane !
An Egyptian trying to take flight
The following user(s) said Thank You: ZR.

Re: eDBF V2 Scratch Build Z Pink Beaver 7 months, 3 weeks ago #26740

  • ZR.
  • OFFLINE
  • Board Blazer
  • Posts: 3058
Thanks

yes, orignal builder created a cool plane, will try my best to bring some thing nice again. Yes its cowl is very nice...
* The more fun you have, the greater your value to yourself and to your society. The more fun you share with others, the more fun you have.

* Aviation is not so much a profession as it is a disease.

Re: eDBF V2 Scratch Build Z Pink Beaver 7 months, 3 weeks ago #26747

Nice choice ZR, keep it up

Subscribed!
I like building rather than flying!
The following user(s) said Thank You: ZR.

Re: eDBF V2 Scratch Build Z Pink Beaver 7 months, 3 weeks ago #26762

ZR Can you Post Pics Of your Hot Wire cutter
Regard,
Hamza Javed

Re: eDBF V2 Scratch Build Z Pink Beaver 7 months, 3 weeks ago #26766

  • ZR.
  • OFFLINE
  • Board Blazer
  • Posts: 3058
* The more fun you have, the greater your value to yourself and to your society. The more fun you share with others, the more fun you have.

* Aviation is not so much a profession as it is a disease.

Re: eDBF V2 Scratch Build Z Pink Beaver 6 months ago #29415

  • ZR.
  • OFFLINE
  • Board Blazer
  • Posts: 3058
Dear Friends Im really sorry could not continue / build this Pink Beaver for the competition due to time constraints . But will complete it later.

At least participated in the competition to spread the cause. We love this hobby we love RCPAK.
* The more fun you have, the greater your value to yourself and to your society. The more fun you share with others, the more fun you have.

* Aviation is not so much a profession as it is a disease.

Re: eDBF V2 Scratch Build Z Pink Beaver 6 months ago #29431

  • BABUR
  • OFFLINE
  • Platinum Boarder
  • Posts: 452
ZR: you are the member of our family of RC Brethren here at RCPAK and you do not worry for being late,
at least you showed your interest and choice including spirit . . .
Sajjad Nabi Babur
The following user(s) said Thank You: ZR.
  • Page:
  • 1
Time to create page: 0.82 seconds
 

Friends Online

Powered by EvNix